8.Wash and disinfect the system every 3-6 months with a suitable cleaner and
according to its instructions for use.
9.Do not pull out the cable to unplug. Do not turn ON and OFF the appliance by
connecting it and disconnecting it from the source of electricity.
10. Do not clean the outside of the appliance with water to avoid electric shock. Clean
it with a soft cloth.
11.If you are not using the appliance for a long period of time , or even during the
night, you can turn it OFF to save energy.
12. Do not attempt to change the power cord by yourself if it has been torn. Contact
the manufacturer or specialized service personnel.
13.The equipment must be installed keeping easy access to the electrical plug.
14.WARNING - to avoid the risks of an unstable installation, the equipment must be
installed following its instructions.
15.WARNING - keep the ventilation openings at the back of the appliance uncovered
and unobstructed.
16. NOTICE - do not damage the refrigerant circuit.
17.The environmental temperature for this appliance should be between 10 ° C and
38 ° C.
18.This equipment is not designed to be used by persons with reduced mental or
sensory abilities or without experience unless they are carefully supervised by
persons responsible for their safety during the use of the equipment. Supervise
children to make sure that they do not play with the appliance.
19.Do not place other appliances inside this equipment unless those are
recommended by the manufacturer.
20.Do not store explosive substances such as spray cans inside this appliance.
What to do in case of problems:
Possible cause
Problem
1.Appliance is not connected to the
Lights do
electrical system
not lit
2.The switch is not ON
1.The water container is broken
Leaking
2.The water pipe is broken
3.The faucet is damaged
1.Heating switch is damaged or
does make not contact
Not heating
2.The heating tank is burnt
3.The electrical connection is loose
1.Cooling switch is damaged or
Not cooling
does not make contact
2.The electrical connection is loose
WARNING! Always disconnect dispenser from wall socket before repairing or
replacing parts.
How to solve
1.Make sure that the switch is ON and the
plug is connected
2.Turn the switch ON.
1.Replace the water container
2.Replace the water pipe
3.Replace the faucet
1.Replace the switch and check the
connections
2.Replace heating tank
3.Repair connections
1.Replace the switch and check the
connections
2.Repair connections
Características
1.Diseño moderno
2.Ahorro de energía, bajo nivel de ruido, estructura resistente y gran estabilidad.
Adecuado para uso en hogares, hoteles, escuelas, etc.
3.Las partes plásticas de este producto
son fabricadas con
calidad.
4.Doble sistema de seguridad, "control de temperatura" y "protección de
calentamiento". La temperatura del agua caliente siempre está entre 80º C y 95º C,
lo suficiente para preparar café o té u otro alimento instantáneo.
5.El sistema de enfriamiento del dispensador de agua es resistente y adecuado para
su uso durante el verano.
6.Este producto puede ser usado con agua embotellada o con un purificador de agua.
Nombre de las Partes
Soporte para la Botella
Interruptor de encendido
Luces Indicadoras
Placa de Información
Grifo de Agua Fría
Nota: El grafico es solo para referencia. El artefacto actual puede tener
diferencias con el grafico.
Modo de Operación
1.Inserte la botella verticalmente sobre el soporte y presione las llaves hasta que el
agua fluya y salga del grifo de Agua Caliente rojo (HOT).
2.Inserte el enchufe eléctrico al enchufe de pared y coloque los interruptores de
electricidad en posición de encendido (ON) para que el equipo arranque. NO MUEVA
LOS DOS INTERRUPTORES A LA VEZ. Las luces de enfriamiento y calentamiento
deben encenderse. El equipo está diseñado para proveerle agua fría o caliente cada
vez que usted lo necesite. Automáticamente se encenderá y/o apagara cuando el
agua alcance las temperaturas deseadas.
plástico durable de alta
Grifo de Agua Caliente
Bandeja de Goteo
Tapón de Goteo
Cable de Conexión Eléctrica