Troubleshooting
Defect
The appliance does not function.
The appliance vibrates and shud-
ders.
The appliance is not cooling.
The ventilator of the cooler runs
often or always.
The door 6 closes poorly or not
at all.
Cause
• The plug 8 is not connected
with mains power.
• The button On/Off
not been pressed.
• The power socket is defective.
• The appliance is defective.
The appliance is standing on an
uneven surface.
• The time passed is not yet
sufficient to achieve the
desired temperature.
• The temperature is incorrectly
programmed.
• The location is unsuitable.
• There are a lot of bottles in
the wine cooler cabinet.
• The door 6 is not properly
closed.
• It has been programmed to a
very low temperature, or the
difference between the ambient
temperature and the pro-
grammed temperature is very
large.
• The bottle grill 0 or the bottles
are not correctly inserted.
• The appliance is not standing
on a level surface.
- 22 -
Solution
• Insert the power plug 8 into a
wall socket.
• Press the button ON/OFF
5 has
5.
• Use a different wall power socket.
• In this case, contact Customer
Services.
Take steps to obtain a firm
positioning by calibrating the
adjustment feet 9.
• Wait for a short period.
• Check the programmed
temperature.
• Place the appliance at a cooler
location.
• The appliance needs longer to
cool down.
• Close the door 6 correctly.
• Then it is normal that the venti-
lator is running. It is not a
malfunction.
• Insert the bottle grill 0/bottles
the right way around.
• Place the appliance on a suitable
and level surface.