Thank you for purchasing this Price Pfi ster product. All Price Pfi ster products are carefully engineered, and factory tested to
provide long trouble-free use under normal conditions. This prouct is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238)
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Price
Pfi ster recommends calling a professional if you are uncertain about installing
this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are
usually found under the sink or near the water meter. If you are replacing an
existing faucet, remove the old faucet from the sink and clean the sink surface
thoroughly.
3
3 TOOLS RECOMMENDED
•Plumber's putty
•Slotted screwdriver
•Pliers
•Adjustable wrench
•Cloth
Your installation may require supply lines and/or shut-off valves, cone washers,
friction rings, or other additional tools. Consult the store where your faucet was
purchased for recommended connections that may be required for you area.
INSTALLATION
These instructions cover three different installations:
4
For installation using single post:
For installation using deck plate:
For installation using soap dispenser:
•Philips head screwdriver
•Flashlight
Go To Step 5
Go To Step 5
Go To Step 7
Go To Step 7
Go To Step 9
Go To Step 9
ENGLISH
INSTALLATION USING SINGLE POST
5
5 INSTALLING MOUNTING RING
Place Mounting Ring (5A) over Plastic Seal (5B) and above Sink Hole (5C).
Align Mounting Ring (5A) over the center of sink hole.
6
6 FAUCET INSTALLATION
With the spout facing forward, carefully install the Faucet Supply Hoses (6A)
through the center hole of Mounting Ring (6B).
2
5A
5B
5C
6A
6B
STOP
Go To Step 13
Go To Step 13