How To Install The Product - Axis PT C Guia De Instalacion

How to install the product

WARNING
• Risk of electric shock. Make sure the power supply is disconnected.
• Emission of light from the illuminators (risk group 2) can be harmful for eyes. Pay attention
to the provided indications. To reduce the risk of eye damage, avoid eye exposure, and use
appropriate shielding or eye protection at distances of less than 1.5 m (4.9 ft).
CAUTION
During normal operation, the surface of the illuminator can reach high temperatures. Do
not allow direct contact and position the appliance where it is inaccessible to unauthorized
personnel. Before touching, switch off the illuminator and allow to cool for a minimum
period of 10 minutes.
1
Tilt unit cover
1. Unscrew the four tilt unit cover screws (T20) and remove the tilt unit cover.
Important
Make sure that the gasket under the tilt unit cover remains in place.
AXIS PT IR Illuminator Kit C
11