Publicidad
Enlaces rápidos
Publicidad
Resumen de contenidos para Able Desk ADC–DC1–101
- Página 1 No. ADC – DC1 – 101 Standing desk converter Assembly instructions...
- Página 2 Cautions and use Parts key Assembly Cable management Specs...
- Página 3 This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. Important If any parts are missing or faulty, contact Able Desk Co for assistance. Atención Lea todo el manual de instrucciones antes de comenzar la instalación y ensamble de la unidad.
- Página 4 Part A (1x) Table top & frame Part B (1x) Keyboard tray Short screw (C1) & Part C (4x) plastic filler (C2) Part D (3x) Adhesive foam bumper Part E (2x) Cable-tie mount Part F (3x) Cable ties Part G (1x) Phillips screwdriver...
- Página 5 Step 1 : Remove short screws from plastic fillers (4x) Part C1 Part C2 Part C Step 2 : Fill keyboard holes & place adhesive foam bumpers Part B x1 Part C1(4x) D(3x) Step 3 : Remove tie from underside of table top Scissors Part A (1x) (Not included)
- Página 6 Step 4 : Expand table frame and remove ties and covers DO NOT press the release handle while on the side. Only press the release handle when in the upright position. Step 5 : Attach keybaord to table frame Part B (1x) Part A (1x) Part C2 (4x) Part G (1x)
-
Página 7: Cable Management
Cable management Part E (2x) Part F (3x) Specs Dimensions 31.5” x 24.2” x 4.2” Height range Up to 19.7” Weight 22.5 lbs Weight capacity Up to 37.4 lbs Maintenance Check that the bracket is secure and safe to use at regular intervals (at least every three months). - Página 8 For assistance, visit abledesk.co/help or email support@abledesk.co...