Technical Specifications - Flex DWL 2500 10.8 Instrucciones De Funcionamiento Originales

DWL 2500 10.8/18.0V
 The light source of this lamp cannot be
replaced. You must replace the entire lamp
if it no longer works due to a defect or
because its service life has expired.
 Do not use the LED rechargeable work
lamp in road traffic.
 Remove the battery from the rechargeable
work lamp before transporting, storing or
performing any work on the rechargeable
work lamp (e.g. installation, maintenance,
etc.).
 Do not let children use the LED
rechargeable work lamp. It is designed for
professional use. Children may be
accidentally blinded or may blind others.
 Do not open the battery. There is a risk
of a short-circuit.
 Protect the battery from heat, e.g. from
continuous exposure to sunlight, fire,
water and humidity.
There is a risk of explosion.

Technical specifications

Machine type
Lithium-ion battery
Lighting duration
Colour temperature
Total flux
Weight according to "EPTA Procedure
01/2003" (without battery)
Size (LxWxH)
 If the battery is damaged or used
improperly, fumes may be emitted.
Provide fresh air and consult a doctor
if you feel unwell. The fumes may irritate
the respiratory tract.
 Recharge only with the charger specified
by the manufacturer. A charger that
is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
 Pointed objects, such as nails or screw-
drivers, or external forces may damage
the battery. This may cause an internal
short-circuit and the battery to burn,
smoke, explode or overheat.
 The light source contained in this luminaire
shall only be replaced by the manufacturer
or his service agent or a similar qualified
person.
DWL 2500 10.8/18.0V
LED rechargeable work lamp
18.0/2.5
V/Ah
18.0/5.0
h
Backup: 2h at 10%/300 lm
K 2500/3500/4500/5500/6500
lm
kg
mm
10.8/2.5
10.8/4.0
10.8/6.0
~ 3.0 -30
3000/100%
2250/75%
1500/50%
750/25%
300/10%
2.0
240x230x104
11