Ecler DANTE MIMO4040DN Manual De Usuario página 18

Matrices digitales
Tabla de contenido

Publicidad

Processing
Output delay (x40)
Parametric EQ types (4max/input -
High & Low pass output X-over filters
Input noise gate (x40)
Input compressor / limiter (x40)
Input Frequency Shifter (x40)
(Feedback Loop Reducer)
Output Limiter (x40)
Built in Signal Generator
Input level (x40)
Range: from Off to 0 dB
Mute: Yes
Signal Polarity reverse: Yes
Metering: VU+clip pre & post fader
Output level (x40)
Range: from Off to 0 dB
Mute: Yes
Solo: Yes
Signal Polarity reverse: Yes
Metering: VU+clip pre & post fader
Output gain (x40)
Range: from 0 to +6 dB
Input delay (x40)
from 0 to 1000 ms. Units: sec/ms/m/cm.
from 0 to 1000 ms. Units: sec/ms/m/cm.
Bypass / On-Off all channels
8max/output)
Param Eq. Freq: 20Hz-20kHz;
Low & High Shelf 6/12 dB/oct
Low & High Pass 6/12 dB/oct
All Pass 1/2 order
Bypass On-Off
(x40)
Butterworth in 6/12/18/24 dB/oct
Bessel in 12/18/24 dB/oct
Linkwitz-Riley in 12/24 dB/oct
Bypass On-Off
Threshold: from –80 dBV to +18 dBV
Depth: 0 dB to 80 dB
Attack time: from 0,1 ms. to 500 ms.
Hold time: from 10 ms. to 3000 ms.
Release time: from 10 ms. to 1000 ms.
Bypass On-Off
Threshold: from –36 dBV to +18 dBV
Knee: hard / soft
Ratio: inf:1 (limiter)
Attack time: from 0,1 ms. to 500 ms.
Release time: from 10 ms. to 1000 ms.
Make up gain: from 0 to +10 dB
Per input. ON / OFF function
Bypass On-Off
Threshold: from –36 dBV to +18 dBV
Attack time: from 0,1 ms. to 500 ms.
Release time: from 10 ms. to 1000 ms.
Sine: from 20 Hz to 20 kHz
Polarity: from 20 Hz to 20 kHz
White noise
Pink noise
Stereo Linking
Adjacent input / output channels
Linked processing
Matrix routing linked
Mix Matrix
Size: 40x40
18
Gain: -60/+12 dB
Q: 0.3 to 200

Publicidad

Tabla de contenido
loading

Tabla de contenido