Manually Removing The Device From Your Z-Wave™ Network - D-Link mydlink DCH-Z310 Manual De Usuario

Section 4 - Troubleshooting
Manually Removing the Device From Your Z-Wave™
Network
To remove your DCH-Z310 from your Z-Wave network:
Step 1:
Make sure your Z-Wave hub or primary controller is in exclusion (remove) mode.
Step 2:
Quickly press the button on the front of the DCH-Z310 three times to put it into exclusion mode.
Step 3:
The device will be removed from your Z-Wave network.
D-Link DCH-Z310 User Manual 24