ICM 1812 Serie Manual Del Usario página 5

Mailbox Flag Assembly Instructions
INS-135-REV 1
1. Insert the Flag into the slot of the Plastic Flag
Holder.
2. With the Flag pointing up, align the three prongs on
the Plastic Flag Holder with the three holes on the
flag mounting area on the mailbox.
3. Align the hole in the Flag with the
insert located on the side of the mailbox.
4. Fasten the Flag and Plastic Flag Holder in place
using the 1 ⁄ - 20 x 1"L Phillips Bolt. Do not over
4
tighten bolt as it will inhibit the movement of the
flag.
1 ⁄ - 20 threaded
4
Page 3 of 4