Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Do not cover the item when it is operating.
Avoid placing foreign objects in air vents.
It is forbidden to pull and twist the cord.

Before use

Take the heater out of the box
Remove the packing material
Check the installation parts
Installation
The panel convector heaters should be wall-mounted. Some items can be also stand with feet.
Mount feet on the baseboard in accordance with scheme G1.
For wall mounting study scheme G2.
a..Install the bracket with screws firstly,see the image1
b.Drill the holes at each sides on the wall,then insert the plastic expanded plugs within,
Fix the bracket in the wall with screw,see the image2
c.Fit the heater into suitable position ensuing that the holes align with bracket.see image3
d.Tight the screw on the top of bracket to catch steady
Pay attention to the position of the convector with regard to other objects.
It is forbidden to place item under the socket.
The convector has got IPX4 degree of protection
If you place item in bathroom, avoid ingress of water on the surface.
G(1)
G(2)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Svca20ph

Tabla de contenido