Italian Design ND-9090 Manual De Instrucciones página 4

Move the probe as words 'O'or 'Z'.
4. Mesotherapy(face) spare part---
Apply the skin care products on the treated
parts.
Choose the Mestherapy (face)function.(as pic-
ture)
Uitrasonic
Mesotherapy(B)
Note: when use mesotherapy probe the Beautician
should use one hand to hold the probe and the other
hand touch the skin where is operated on in order to
create pathway for micro eletricity.
Set each parameter as follows:
State: on
Time: 05
Intensity: 03 (can be adjusted according to diffe-
rent customers)
Frequency:20Hz (can be adjusted according to
different customers)
State:
Intensity:
Frecuency:
Time:
Move the probe as number '8
(From chin to forehead)
5. Cooling treatment (spare part ---
Choose the cold hammer function(as picture)
Uitrasonic
Mesotherapy(B)
1 1
i
Cold hammer
Mesotherapy(F)
On
03
20 Hz
05
)
Cold hammer
Mesotherapy(F)
· 262 ·
Set each parameter as follows:
State:on
Time:05
Intensity:10 (can be adjusted according to diffe-
rent customers)
State:
Intensity:
Time:
Move the probe as number 8
(From chin to forehead)
Belly
1. Check and analyze the parts need to be cared.
2. Choose the appropriate skin care products.
3. Ultrasonic care (spare part)--
Apply the skin care products on the treated parts
Choose the ultrasonic function (as picture).
Uitrasonic
Mesotherapy(B)
Set each parameter as follows:
State:on
Time:05
Intensity: 08(can be adjusted according to diffe-
rent customers)
State:
Intensity:
Time:
Move the probe with circle as picture
On
10
05
Cold hammer
Mesotherapy(F)
On
08
05