Battery Replacement - Sonos Controller 200 Guía Del Producto

Sonos Controller 200 13
Recharging
The Sonos Controller 200 can be recharged by placing it in the Sonos Charging Cradle
200. The Battery Charge Indicator on your Controller displays the current
battery charge level. To extend the battery life, it's best not to let the Lithium Ion
battery discharge completely before recharging. Keep the Controller seated in the
charging cradle when not in use, as this type of battery does not suffer from memory
effect and can be charged anytime.
If the battery charge begins to run low, a message will appear on your Controller
screen indicating that it's time to recharge. Simply place it in the cradle to recharge.
If you should miss this message and the Controller's battery discharges completely,
simply place the Controller into the charging cradle. The Controller's light sensor
will turn orange, indicating that a reset is in process. It will take a few minutes for the
Controller screen to wake up.

Battery Replacement

After several years (depending upon usage), the battery on your Controller may not
hold a charge as long as it once did. You can purchase a replacement battery (visit our
Web site at www.sonos.com for more information), and then follow the instructions
below to replace the battery.