Connection; Power Supply; By Means Of Poe-Switch (To Ieee802.3At); By Means Of Poe Injector - Telecom Behnke MYINTERCOM Manual De Instrucciones

Instructions for 2-wire transmitter-receiver
GB

Connection

COnneCtiOn
2.
2.1. Power supply

By means of PoE-Switch (to IEEE802.3at)

PoE switch to
IEEE802.3at (33,6 W)
The IEEEE802.3at-capable switch supplies the 2-wire receiver with power. This transmits both
data and power via 2 wires to the transmitter, which in turn without any other
power supply supplies the PoE-capable terminal device with power.

By means of PoE injector

PoE to IEEE802.3at
(33,6 W)
A PoE injector to IEEE802.3at is looped in, in order to supply the transmitter, received and PoE-
capable terminal device with power.
14
2-wire receiver
Switch
2-wire receiver
indoors outdoors
100 m YSTY,
200 m coaxial
indoors outdoors
100 m YSTY,
200 m coaxial
2-wire transmitter
IP terminal
device, PoE to
IEEE802.3af
(15.6 W)
2-wire transmitter
IP terminal
device, PoE to
IEEE802.3af
(15.6 W)
www.behnke-online.de