Care & Cleaning
CAutIoN: before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or
removing the fuse from the fuse box.
□
Clean the fixture with a soft, dry cloth.
□
Do not use cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
WARNING: before doing any work on the fixture, disconnect power to the light fixture by turning the breaker off
or removing the fuse from the fuse box.
Minor problems often can be fixed without the help of an electrician.
Problem
The fixture will not light.
The fuse blows or the
circuit breaker trips when
the light is turned on.
Light distribution
-150
-120
-90
-60
-30
Possible Cause
The power is off.
The circuit breaker is off.
There is a bad connection.
There is a defective switch.
The wires are crossed or the
power wire is grounding out.
-/+180
150
0
500
1000
1500
2000
30
2500
ANGLE: 25°
Ensure the power supply is on.
Ensure the circuit breaker is in the on position.
Check to ensure proper wire connections are
made. Contact a qualified electrician.
Contact a qualified electrician.
Check the wire connections.
Contact a qualified electrician or call Commercial
Electric customer service 1-877-527-0313.
-150
-120
120
90
-90
60
-60
-30
8
Corrective Action
-/+180
150
0
90
180
270
360
30
450
ANGLE: 75°
120
90