Problems, Causes And Solutions - Valex APL 1012 Guia De Inicio Rapido

the vacuum nozzle.
Every time it is used:
- Empty the collection box.
- Take out and clean the filter (fig.C). If washing is envisaged,
dry it well before reassembling it, in order to prevent the for-
mation of mould.
- Unhook and replace the dust bag, if necessary. If it is of the
reusable type (fabric), empty it and clean it.
REPLACING THE DUST BAG (fig.A pos.23)
Only use original spare parts suitable for your vacuum cleaner.
Use eye protection and an anti-dust mask.
Open the latches (pos.7), remove the vacuum head (pos.2),
unhook and remove the full bag and put in the new bag making
sure it fits well.

PROBLEMS, CAUSES AND SOLUTIONS

PROBLEM CAUSES
The electri- Power supply line
cal vacuum disconnected
cleaner fails
Plug not inserted Insert the plug in the elec-
to start
Electrical fault
T h e e l e c - Box full
trical vacu-
Bag full
um cleaner
d o e s n o t Filter dirty
vacuum ef-
The float has in-
ficiently
tervened (only for
models that are
suitable to vacu-
um liquids)
Check that the
vacuum hose or
the nozzle are not
blocked
Vacuum head not
assembled cor-
rectly
Substantial Vacuum hose blo-
increase in cked
motor revo-
The float blocks
lutions
the vacuum
IMPORTANT! If the electrical vacuum cleaner still fails to
! !
operate correctly after you have carried out the above opera-
tions, or in the event of anomalies other than those described
above, take it to an authorised service centre showing proof
of purchase, and ask for original spare parts. Always provide
the information shown on the technical data label.
- 8 -
SOLUTIONS
Check the electric power
supply line
tric power supply socket
and press the start button
Contact an authorised
service centre.
Empty the box
Replace the dust bag
Clean
Empty the box
Clean. To free the hose,
use the handle of a brush
to help you, pushing it up
the hose without forcing.
Reassemble the vacuum
head checking that it fits
well onto the box and lock
it in place with the latches.
Switch off and clean
Try to switch off, wait
for a few seconds and
switch back on. If this
has no effect, empty the
collection box.
Clean the machine and all its accessories thoroughly (see
Maintenance section).
Keep the machine out of reach of children, in a stable and safe
position. The place must be dry, free from dust, temperate and
protected from direct sunlight.
Keep children and unauthorised personnel out of the storage-
room.
DISPOSAL
In order to protect the environment, proceed according to the
local laws in force. Contact the relevant authorities for more
information.
When the machine is not longer useable or repairable, deliver
the machine and packaging to a recycling centre.
Electric and electronic waste may contain substances that are
dangerous for the environment and for human health. For this
reason they must never be disposed of together with domestic
waste, but collected separately in specific collection centres or
returned to the retailer when similar new equipment has been
purchased. The illegal disposal of such equipment may result
in prosecution to the full extent of the law.
WARRANTY
The product is protected by law against non-compliance with the
declared characteristics provided it is used only in the manner
described in the instructions, it has not been tampered with in any
way, it has been stored properly, has been repaired by authorized
and, where applicable, have been used only original spare parts.
In the case of industrial or professional use or when using such
a guarantee is valid for 12 months.
To issue a claim under warranty you must present proof of
purchase to your dealer or authorized service center.
STORAGE