Dvd Player Or Other Accessory Digital Source Devices - Magnavox 50MF231D Guia Del Usuario

SPDIF
OUT
VIDEO IN
AV3
SPDIF
OUT
DVD / Set-Top Box
VIDEO IN
AUDIO IN AUDIO IN
AV1
AV2
AV1 :
YPbPr + L + R
conn us entry05 digitalYPbPr.eps
DVD / Set-Top Box
conn us entry05 digitalRGB.eps
S-VIDEO
1
DVD / Set-Top Box
English_DFU_37131.indd 22
YPbPr
VIDEO IN VIDEO IN
AUDIO IN AUDIO IN
AV1
AV2
AV2 :
YPbPr + L + R
1
VIDEO IN
RGB
SPDIF
OUT
S-VIDEO
VIDEO IN
AV3
AV3 :
L + R

DVD Player or other accessory digital source devices

Devices with Component Video Output Connectors (YPbPr)
This TV is capable of displaying 1080i, 720p and 480p DTV signals when
connected to a DTV tuner Set Top Box. Select the output of the Set Top
Box to either 1080i, 720p or 480p. A DTV signal must be available in your
area.
Connect the three separate component video cables 1 to the device
&
having component video outputs (YPbPr), such as Set Top Boxes, DVD-
players, laser-disc players, videogame players, satellite receivers or other
equipment, and to the Y , Pb and
In case of a device with digital audio, connect the audio cable 2 to the
é
of the device and to the
DIGITAL AUDIO IN
of the TV.
OUT)
In case of a device with analog audio, connect the audio cable to the
device's and 3 jacks and the
AUDIO L R
Devices with RGB output
Connect the device with RGB output to the
&
Connect the audio cables to the
é
Devices with an S-Video connector
Connect an S-Video cable to the
&
Note: When using the
S-VIDEO
input that you are using.
VIDEO
Connect the audio cables to the device's
é
the and audio jacks 2 on the TV accordingly to where you
L R AV3
connected the S-Video cable.
Notes
- If necessary, you can adjust the picture position to the center of the screen with the
cursor keys.
- The labels for the component video sockets may differ depending on the DVD
player or the device connected. Although the abbreviations may vary, the letters B
and R stand for the blue and red component signals, respectively, and Y indicates
the luminance signal. Refer to the DVD player's or devices instructions for use for
definitions and connection details.
- This television is designed to accept high definition signal standards 720p and 1080i
as specified by the Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to display properly.
- Due to possible digital image distortion when displaying signals from connected
digital equipment, automatically the Auto picture setting
menu, Auto picture, p. 14.
Changing this setting during reviewing will not be stored as
switch off.
: in case you notice scrolling images, wrong colors or no color, no picture, or
Warning
even combinations of these on your screen, check if the connections are done in the
correct way or move your digital device further away from your TV.
22
Pr jacks of on the TV.
AV2
DIGITAL AUDIO OUT(SPDIF
and audio jacks of
L R
/ /
Pr Pb input 1 jacks.
R B Y/G
and jacks of 1.
L R AUDIO AV1
input 1.
AV3 S-VIDEO
connector do not connect any device to the
and jacks and to
AUDIO L R
Soft is selected. See Picture
Personal setting after
.
AV2
AV
2006-03-29 6:31:02 PM