BOND MANUFACTURING 67513 Instrucciones De Montaje página 4

Inspect the hose before each use of the appliance. If the hose shows signs of cracks, abrasions, cuts or damage of any kind, do not
operate the appliance. Fix or replace the hose as required before using the appliance. For assistance with repair or replacement of
the hose, call Bond Manufacturing at 1-866-771-2663. Use only replacement parts from the manufacturer.
WARNING !
* Do not light or use gas unit if lava rocks are wet. Ensure lava rocks are completely dry before igniting as intense heat could cause the
rocks to crack.
* Lava rocks could hit somebody's face or eyes during initial start of this unit, so please keep away from the firebowl for the first 20
minutes after it has been ignited.
*LP GAS WARNING: Do not exceed 1/4" depth of fire glass or small lava rocks directly above burner holes. Applying too many lava
rocks/fire glass may result in unburned gas pooling in firebowl or firepit. Ventilation is required to allow fresh air into enclosure and any
residual gas to escape.
Warranty and Installation Information:
The Bond warranty will be voided by and Bond disclaims any responsibility for the following actions:
► Modification of the firebowl and/or components including the gas valve assembly.
► Use of any component part not manufactured or approved by Bond.
► Use and installation other than as instructed in this manual.
Accessories
ITEM DESCRIPTION
A Lava rocks
B Battery (AAA)
C Body
D Door
E PVC cover
QTY
1 BOX
1PC
1PC
1PC
1PC
4