Publicidad
Idiomas disponibles
Idiomas disponibles
FIG. 5
Top Guide
Rope
5. NET SET UP
Stretch the assembled Net and poles across the playing area until the Net is taut. Press the Pole Anchors into
the ground with the poles touching the ground. Slip the poles onto the anchors. Holding the poles in the vertical
position, press the Guide Rope stakes into the ground at a 45º angle, 3 feet to 5 feet from the pole and 3 feet to
5 feet apart. Make sure that the hooks on the stakes are facing away from the poles.
FIG. 6
FIG. 6A
Ground
Stake
Hook
TIP: After the net is
assembled, you can
adjust the pole tension
by sliding the tension
clips up or down along
the guide ropes.
6. BOTTOM GUIDE ROPE SET UP
Make the loops on the Bottom Guide Rope tension clips large enough to slip over the stakes already in the
ground. Make sure that the Guide Rope loops are placed under the stake hooks as shown in FIG. 6
NET100_037D
Bottom Guide
Rope
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Top Guide
Rope
Bottom Guide
Rope
Loop
Ground
Stakes
VOLLEYBALL SET
ASSEMBLY INSTRUCTIONS
MODEL : NET100_037D
TIP: After the net is completely
assembled and the pole tension is
correct, the net can be tightened by
adjusting the tension adjuster (#15).
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
See FIG. 5 and 6.
1
2
3
4
5
6
7
8
9
10
11
12
15
13
14
15
16
17
18
19
20
21
22
23
24
25
FIG. 6B
www.themdsports.com
Publicidad
