Assembly - HAMPTON BAY OFW111R-HD Guía De Uso Y Cuidado

Assembly

1
Attaching the handle to the mesh cover
Insert the handle (A) into the hole in the mesh cover (B). Use the
c
wrench (DD) to secure the M6 nut (BB) to the underside of the mesh
cover (B).
A
B
BB
3
Attaching the heat shield to the fire bowl.
Attach the heat shield (I) onto the underside of the firebowl (E) by
c
inserting three M6 x 12mm bolts (AA) through pre-drilled holes in
the firebowl (E) and into the heat shield (I).
Tighten all bolts with a screwdriver.
c
AA
2
Assembling the air vents
Place the firebowl (E) on its side on a smooth, clean surface. Attach
c
the air vents (D) to the fire bowl (E) by inserting two M6x12mm bolts
(AA) through the pre-drilled holes in the firebowl (E) and into the air
vents (D). Tighten all bolts with a Phillips screwdriver.
D
4
Attaching the legs to the fire bowl
Attach Legs (F and G) to the firebowl (E) by inserting M6 x 12mm
c
bolts (AA) through pre-drilled holes in firebowl (E) and legs (F and
G) as illustrated.
Tighten all bolts with a screwdriver.
c
I
Please contact 855-HD-HAMPTON for further assistance.
5
E
AA
G
AA
F
HAMPTONBAY.COM
E