Mestra 3132 Serie Manual De Instrucciones página 2

3132...
for purchasing your new pressure sprayer. Thank you for the trust
you have shown in our brand.
Pressure sprayers 3132... 1,5 l are designed for spraying alkaline
detergents and care products.
Not suitable for, and not to be used under any circumstances for:
• • • • highly flammable and flammable liquids with a flash point
below 55° C
• • • • solvents and liquids containing solvents
• • • • highly viscous or sticky liquids or liquids that leave residue which
cannot be completely rinsed out of the device.
Products other than those approved by the manufacturer as well as
usage for purposes excluded above are not in conformity with proper
use.
The manufacturer shall not be liable for any resulting damages or for
unauthorized modifications to the device.
Do not leave the device in the sun.
Check each time before using:
• • • • Are all parts that are under pressure and convey liquids free of
damage?
• • • • Are those parts functioning properly?
Replace devices that are damaged or not functioning properly
immediately.
Follow the spray manufacturer's instructions.
Do not leave under pressure for an extended period of time.
Never direct spray at persons, animals, or bodies of water.
2293380
1.5 l 1.60 l
MF P.O.BOX 1154 71691Freiberg/N
3 bar 30 ° C
Only liquids with a flash point above 55 ° C are permitted!
Do not unscrew the pump from the tank when device is under
pressure.
Do not blow through clogged nozzles or valves with your mouth.
• • • • Turn the pressure release valve on the side until the pressure is
released from the tank.
• • • • Unscrew the pump from the tank.
• • • • Add spraying liquid to the tank up to the filling line.
• • • • Screw the pump tightly onto the tank.
• • • • Generate pressure in the tank by activating the pump (max 15
pump strokes).
• • • • To spray, activate the lever on the pump.
• • • • Releasing the lever interrupts the spray process immediately.
• • • • The spray pattern can be optimally adjusted by turning the nozzle.
• • • • Turn the pressure release valve on the side until the pressure is
released from the tank.
• • • • Unscrew the pump from the tank.
• • • • Do not dispose of residue as wastewater through the drain!
Dispose of surplus environmentally harmful products as hazardous
waste.
410 g Polyethylene 1.15 l / 3 bar
0809