Volume Control - TLAudio FATMAN iTUBE 182 Manual De Usuario

Front & Rear Panel Controls
POWER SWITCH - Press this switch to ON for power. The indicator will illuminate while the power is ON.
Press to OFF to switch off the power.
Please Note The Following: Before switching ON the power, be sure to set the volume control to the lowest setting in order to avoid
damage to the speakers - the speaker-protection circuit will mute the volume for a few seconds after power is switched ON.
SOURCE - For selecting the different Signal Source.
VOLUME CONTROL - To increase or decrease the volume.
6
Power Switch
Line Input
Source
! ATTENTION:
Your iTube 182 should only be
re-started 5 minutes after switching
off, to avoid damaging the tubes.
Speaker Output
Volume
AC Power Input
!