TLAudio FATMAN MOTHERSHIP Manual De Instrucciones página 5

Amplifier Connections
• Connect using high quality, bare(stripped) speaker wire.
Please note that if your speaker wires are not connected
properly you may hear no sound or if polarities are
reversed, you will hear oddities in the signal path with
an unnatural loss of bass frequencies.
• When using bare speaker wires, fit at least 1.6mm of
Connecting the iTube Dock
1 2
1. Video Output: Connect the video cable (yellow)
in between the video output connector (yellow) of
the iTube and the video input of your TV.
2. Audio Output: Connect the audio cable from the
audio output of the ITube docking station to the
audio input of the the iTube Valve amplifier.
3. S-Video Output: Use an S-Video cable (not
included) to connect S-Video output of your iTube
to the S-Video input of your TV.
4. Power adaptor in: Connect power cable between
iTube and mains supply.
ERRATUM
PLEASE USE THE ON SWITCH ON THE REMOTE CONTROL TO TURN ON THE DOCK.
3 4
insulation inside the speaker terminals so that no bare
wire is visible.
• Make sure the wire holders are firmly screwed in to
prevent wires from becoming loose. If wires touch, the
speakers and or the unit could be damaged.
1
2
3
4
1. Backrest.
2. iPod dock connector.
3. iPod dock input connected
indicator LED.
4. Power indicator.
USER MANUAL
ENGLISH
5