Cosina CS-2 Folleto De Instrucciones página 12

®
AUTOMATIC EXPOSURE CONTROL
11
Y our CS-2 's automatic exposure control system
enables you to take always properly exposed
photographs under the lighting conditions
equivalent to from EV-2 to EV-19 (i.e. from
candie light to snow ground view).
Photographing with AUTO :
1. Turn the main switch lever to "ON"
position.
2 . Align the "AUTO" marking on the selector
di al (4) with the index (6).
3. Advance the film, focus, select the aperture
size and compose your subject.
4. Press the release butten slightly so that one
of sixteen LED dots visible in viewfinder •
indicates the shutter speed with which you
are about to photograph.
NOTE L When the shutter speed of slower than
1/ 30 of a second is indicated, the camera
should be tripod-mo unted and used with a
cable release to eliminate the possibility of
vibration due to camera movements . The CS -2
is equipped with a threaded cable release socket
(20) and tripod socket (33) for use with these
accesso ries.
NOTE IL When the
LED of "OVER" or
"UNDER" flickers indicating that it is out of
range, another larger or smaller aperture size
should be selected. If the aperture is already
maximum or minimum, and electronic flash
unit or ND filter should be used.
5. Depress the release butten ali way dawn to
activate the shutter.