Getting Started; Bluetooth Connection - MAC TOOLS SPL10000M Manual De Operación Y Mantenimeinto

GETTING STARTED

•
To use, plug the unit into any 120V AC power source, such as a wall receptacle.
•
Press the button"
Long press on button "
mode.
•
Bluetooth control the light on/off or adjust the light output.
•
One Bluetooth device can connect up to five (5) lights.

BLUETOOTH CONNECTION

Using Your SPL10000M with
If you have a SPL10000M, you can use its
application on your smartphone or tablet, and then operate your light remotely.
•
From either the
phone or tablet.
•
Using the Mac Tools Lighting application, select the
•
Any available Mac Tools
o Press to connect the light to
to change the name of the light ( optional) .
o Press
•
Select the
o Only connected lights will appear on this screen.
•
Press to turn the light on.
o Icon will turn green when light is powered on.
•
Press on the output or adjust the slider bar to choose light output.
THE BLUETOOTH WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED BY BLUE-
®
TOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY MAC TOOLS. IS UNDER LICENSE. OTHER TRA-
DEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE OWNERS.
4
"to turn the light on and off. Press button "
" goes to 10,000lm mode. Long press on putton "
or
GET IT ON
lights will appear on this screen
tab to control up to 5 Mac Tools
capability to pair it with the Mac Tools Lighting
, download the Mac Tools Lighting application to your smart
tab.
.
" or " " to adjust light output.
" goes to 2,000lm
lights.
MACTOOLS.COM