BLACK&DECKER FireStorm FS360 Manual De Instrucciones página 6

All manuals and user guides at all-guides.com
90503223 FS360 screwdriver
when you turn out the lights.
(3) Move charger and tool to a surrounding air temperature of above 40 degree F
(4,5°C) or below 105 degree F (+40,5°C).
(4) If the receptacle and temperature are okay, and you do not get proper charging,
refer to your warranty.
5. The tool should be recharged when it fails to produce sufficient power on jobs which
were easily done previously. DO NOT CONTINUE using product with its batteries in a
depleted condition.
6. To prolong battery life, avoid leaving on charge for extended periods of time (over 30
days without use). Although overcharging is not a safety concern, it can significantly
reduce overall battery life.
7. The batteries will reach optimum performance after being recharged 5 times during
normal usage. There is no need to run the batteries down completely before
recharging.
FUNCTIONAL
DESCRIPTION
1) SWITCH
2) FORWARD/REVERSE/LOCK
OFF SLIDER
3) PIVOT LOCK RELEASE
BUTTON
4) CLUTCH COLLAR
5) TWO GEAR SELECTOR
6) BIT HOLDER
7) BATTERY PACK
8) RELEASE BUTTON
9) CHARGER
5/10/06 9:40 AM Page 6
5
6
8
7
9
6
3
2
4
1
7