Electrical Wiring Diagram - LUCCI AIRFUSION AIRLIE II ECO Manual Del Usuario

Airlie II Fan Installation Instructions
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit
panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts supplied
with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire strands or
connections.
Fig. 10
6 | P a g e

ELECTRICAL WIRING DIAGRAM

1.
(black) to receiver input wire (black, AC IN L) as
shown in Fig. 10.
2.
(white) to the receiver input wire (white, AC IN N).
3.
fan bracket ground wire (green) and fan body
ground wire.
4.
MOTOR L) to motor live input wire (black, TO
MOTOR L).
5.
MOTOR N) to motor neutral input wire (white, TO
MOTOR N)
6.
LIGHT) to fan light live input wire (blue, FOR
LIGHT)
7.
apart so that the green and white wires are on one
side of the outlet box and the black and blue wires
are on the other side.
8.
the wiring into the outlet box.
Connect the household live supply wire
Connect the household neutral supply wire
Connect the household ground wire to the
Connect the reveiver output wire (black, TO
Connect the receiver output wire (white, TO
Connect the receiver output wire (blue, FOR
After connecting the wires, spread them
Turn the connecting nuts upward and push
L D - A I R L I E I I - 5 2 L - X X X / 0 1