Product Description; Function; Connection Notes - IVT LATENTO 500 Instrucciones De Montaje

3. Product description

The LATENTO 500 is an unpressurised buffer storage tank that was developed for
employment in a one-/two-family house. Apartment houses (multi-family houses)
can be supplied via several LATENTO 500 Tichelmann-system connected units.
The LATENTO 500 is able to buffer useful warm water energy. The insulation of the
storage tank has been designed such that the accumulated energy can be stored
over several days. Depending on power demand, this also allows supply over
night without auxiliary heating requirement through the central-heating boiler.

4. Function

The LATENTO 500 was developed due to the growing regenerative energy
generation, e.g. solid material boilers.
Non-utilized power of the heat generator which is not needed for heat flow of the
building is buffered in the LATENTO 500 and transmitted to the system if required.
Recharging is possible from an existing LATENTO XXL into the LATENTO 500 in
case of higher solar yield.

5. Connection notes

Warranty
IVT GmbH & Co. KG will exclusively assume warranty for the functionability of
the LATENTO 500 only then if all notes described in this chapter are observed. In
particular heed the correct hydraulic integration of the LATENTO 500: The warran-
ty applies exclusively for that LATENTO 500 that has been connected following
an installation proposal. The responsibility will be with the planning or executing
company in case of a hydraulic connection of the LATENTO 500 deviating from this.
19