Power On/Off - Wiseup SMILE Guia Del Usuario

5) USB Cable
6) DC5V Charging Adapter
3. Operation
>> Please make sure your camera is fully charged before using.
>> Please make sure a micro SD card is securely fitted into the Micro SD Card
Slot. The camera will not work without a micro SD card.
>> The camera is fully charged when the Indicator Light goes out.

1) POWER ON/OFF

(1) Power on the camera by pressing the Power ON/OFF Button for 2 seconds.
The Indicator Light will flash yellow for 3 times and remain steady, indicating
the camera has entered into standby mode.
(2) The camera will automatically shut down after 30 seconds if the camera is
in standby mode without any operation.
(3) Power off the camera by pressing the Power ON/OFF Button for 2 seconds
again. The Indicator Light will flash yellow for 3 times and then go out.
2) AUDIO RECORDING
(1) Power on the camera by pressing the Power ON/OFF Button for 2 seconds.
The Indicator Light will flash yellow for 3 times and remain steady, indicating
the camera has entered into standby mode.
(2) Press the Audio Record Button to record audio. The Indicator Light will
flash blue twice and go out, indicating audio is being recorded.
(3) Press the Audio Record Button once again to stop audio recording. The
Indicator Light will be solid yellow, indicating the camera is back into standby
mode.