Thinkware sports M1 Seguridad, Garantía Y Guía De Inicio Rápido página 12

Connecting the power cable
Connect the power cable (ACC, GND) to the motorcycle key-on wiring.
• The hardwiring cable must be professionally installed on the motorcycle by a trained mechanic.
It may result in fire or electric shock if the product is installed incorrectly.
• Ensure the wiring is completed correctly after connecting the power cable (ACC, GND) to the
motorcycle key-on wiring. Failure to do so may damage the product or the motorcycle.
Turning the product on or off
The product turns on automatically and continuous recording starts when you turn on the ACC or
start the engine. To turn off the product, turn off the ACC or stop the engine. The product will turn
off automatically.
Using the continuous recording feature
The continuous recording starts when the product is turned on. During continuous recording, the
product operates as follows.
During driving, videos are recorded in 1 minute segments and stored in
the "cont_rec" folder.
• Wait until the product is fully ready to operate after turning it on, and then start driving. Video
recording does not start until the product is completely turned on.
• Park your motorcycle in a safe location before using or configuring product settings.
• The product will stop recording while configuring settings on the THINKWARE CLOUD
application.
• Check the recorded video on the application or PC only. If you insert the memory card directly
into a smart device, such as a smartphone or a tablet PC, and play the recorded videos, the
video files may be lost.
Videos are stored in the following folders, according to their recording mode.
On the application
In the memory card
Operation description
Continuous recording
cont_rec
10
Status LED
Blue (light on)
Manual recording
manual_rec