Ezviz A1S Guia De Inicio Rapido página 10

You can also select wired connection.
Step 1: connect the device to the LAN Interface of your router with a network cable.
Step 2: add the device to EZVIZ app by scanning the QR Code on the cover of this manual or at the bottom of the
device.
Step 3
Adding Detectors
1
Enabling the Adding Detectors Mode
Single click the setting button and the voice prompt of the adding detectors mode is to start.
2
Adding Detectors
Take the detector close to the device (within 50cm) and trigger alarm manually. A voice prompt of
the type of the detector starts indicating the corresponding detector is added (up to 32 detectors
are allowed).
SIM
......
4
IPC
ACCESS