Publicidad
Idiomas disponibles
Idiomas disponibles
Engine Timing Tool Set for Porsche Boxster & 911
INTENDED USE
This Tool set is made for adjusting / checking the engine timing on following models:
Porsche Boxster (986 / 987) 2.5L (as of 1998), 2.7L (as of 2000), 3.2L (as of 2000),
Porsche 911 (996 / 997) 3.6L (as of 2002), 3.4L (as of 2002)
SAFETY INFORMATION
•
Do not use the set if any parts are missing or damaged.
•
Only use this tool for the purpose for which it is intended.
•
Never lay tools on the vehicle's battery. This may short the terminals together.
•
Be careful when working on running engines. Loose clothes, tools and other things can be caught up
in revolving parts which may lead to serious injuries.
•
Keep children and other unauthorised persons away from the working area.
•
Be careful when working on hot engines – risk of burn!
•
Remove the negative battery connection before repairing, so you avoid short circuits and that the
engine will not start unintentionally.
•
This manual is just brief information and will not replace a garage handbook.
•
Always consult specific service literature for information about torques, assemblies and
disassemblies etc.
•
After any successful maintenance and before starting the engine, you should rotate the engine for
two turns manually to check the new control time.
•
Turn the crankshaft in the normal direction (clockwise unless stated otherwise) and only at the
crankshaft itself, never turn the crankshaft by turning camshaft or another wheel.
TOOLS
No.
1
Pin Driver / Extension
2
Alignment Tool
3
TDC Alignment Pin
4
Camshaft Locking Tool
5
Camshaft Supports
6
Camshaft Supports
7
Camshaft Holding Tool
8
Camshaft Holding Tool
,
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
3
4
Description
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
5
6
7
1
2
7
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 8836
8
to be used as OEM
9602
9608
9595
9612
9611
9611
9634
9634
Publicidad
