Measuring Range - Hydrofarm Active Air HGIOHTJ Instrucciones

with mounting keyhole and
fold-away stand
SETUP AND OPERATIONS
1. Find the battery chamber
on the back of the unit. Find
the insulation insert that
separates the unit and the
pre-installed battery. Remove
the insulation insert to power
the unit. The current readings
and the max and min readings
of temperature and humidity
will be displayed.
2. Press the °C/°F button to
select your preferred unit
of measure in Celsius or
Fahrenheit.
3. The outdoor temperature and
indoor humidity readings will
be automatically switched
every 5 seconds. The function
is activated by default with
a cycle icon shown on the
screen. If you prefer only to
display one of the outdoor
temperature and the indoor
humidity, wait until the
preferred reading shows on
INSTRUCTIONS
4. Press and hold the RESET

MEASURING RANGE

Indoor Thermometer:
Temperature Range Indoors (C):
-10° to 50° (14° to 122°F)
Resolution: 0.1°
Accuracy: +/-1°
Outdoor Thermometer:
Temperature Range Outdoors (C):
-50° to 70° (-58° to 158°F)
Resolution: 0.1°
Accuracy: +/-1°
Indoor Hygrometer:
Humidity Range: 25% RH - 98% RH
Resolution: 1% RH
Accuracy: +/-3% RH (between
50%-80%), +/-5% RH (<50% or
>80%).
the LCD screen, then press
the AUTO button to turn off
the auto-switch function. The
preferred reading will stay and
the cycle icon will disappear
from the screen. Pressing
the AUTO button again will
re-activate the function.
button to reset the Max and
Min readings.
3