3.1.2 Back connectors of main unit
Connect other devices to your SoundBar.
AUX IN
a
OPTICAL IN
LINE IN
b
c
a AUX IN
Connect to an analog audio output on the
TV or an analog device
b OPTICAL IN
Connect to an optical audio output on the
TV or a digital device.
c LINE IN
Connect to TV or a MP3 player.
d SOFTWARE UPGRADE
e AC IN
Connect to the power supply.
3.2 Remote Control
f
d
SOFTWARE
AC IN
UPGRADE
e
d
a
b
c
d
e
(Standby-On)
a
Switch the SoundBar on or off.
b Source buttons
AUX INPUT: Switch your audio source
•
to the AUX connection.
LINE INPUT: Switch your audio source
•
to the Line in (3.5mm jack) connection.
OPTICAL IN: Switch your audio source
•
to the optical connection.
•
Bluetooth INPUT: Switch your audio
source to the bluetooth connection.
c MUTE
Mute or restore volume.
d Sound setting buttons
Toggle switch the sound mode presets.
e VOL +/-
Increase or decrease volume.
f PAIR
Activate the bluetooth pairing or disconnect
the currently bluetooth connection.
3.2.1 Replace battery
1
Open the battery compartment.
2
Insert one CR2025 battery, with the polarity
(+/-) as indicated.
3
Close the battery compartment.
Warning
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
•
The product/remote control may or may not contain a
coin/button type battery, which can be swallowed. Keep
the battery out of reach of children at all times!
•
The battery contains perchlorate material, handle
it with care. For information see www.dtsc.ca.gov/
hazardouswaste/perchlorate.
EN
6