Antop AT-402BV Instrucciones página 4

2 / Connecting
2.1 For Outdoor Use, Mast Pole Prepping for Connection
2.1.1 Select entry point to house. Drill hole under the eaves at entry point. Attach coaxial cable
with water proof cap end to connector in the antenna. For Vertical Mast Pole Mount utilize
U-shape coaxial cable setup to prevent water from entering interior of antenna casing. Feed
lose end of coaxial cable through drilled opening.
Water-proof cap
Drill a hole on the eaves, and arrange
the cable into inner huose
2.2 For Indoor Use, in Attic placement, Prepping for Connection
Select entry point to house. Drill hole at entry point. Attach coaxial cable with water proof cap
end to connector in the antenna. Feed lose end of coaxial cable through drilled opening.
2.3 If you haven't done so, attach coaxial cable to connector in the antenna.
1
3
U-shape cable arranging prevents
water from entering
2
ON/OFF
0.3ft
The back of antenna
4
LED
3ft
2.1.1
2.3
Back of TV
ANT/IN
CABLE IN
3