Arctic Cove MAC630 Guia De Inicio Rapido

STAINLESS STEEL EXPANSION KIT
FOR USE WITH STAINLESS STEEL MISTING KIT (NOT
INCLUDED)
MAC630 — 8 FT. EXPANSION KIT
MAC640 — 12 FT. EXPANSION KIT
To register your ARCTIC COVE product, please visit www.arcticcove.com.
WARNING:
To reduce the risk of injury, user must read and understand the operator's
manual for their misting kit before using this accessory. To reduce the
risk of injury or property damage, ensure proper connection of all acces-
sories before use. Ensure compatibility and proper fit before using this
accessory. Turn off the flow of water to the misting kit before changing
or adjusting accessories. Do not use if a part is broken or appears to
be damaged. For cold water use only. Save these instructions. Refer to
them frequently and use them to instruct other users.
PACKING LIST
See Figure 1.
MAC630: Slip lock T-fitting, slip lock connector, slip lock connector with
nozzle, slip lock elbow, and (4) 2 ft. stainless steel tubes
MAC640: Slip lock T-fitting, slip lock connector, slip lock connector with
nozzle, slip lock elbow, and (6) 2 ft. stainless steel tubes
IMPORTANT SAFETY RULES
WARNING:
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all
instructions listed below, may result in electric shock, fire and/or serious
personal injury.
 Never direct water toward any electrical wiring or devices.
 Ensure all accessories are properly connected before using the
product.
 ONLY use cold water.
 For outdoor use only.
 Do not use this expansion kit to spray pesticides, liquid fertilizers,
or any other chemicals. Spraying these substances could result in
serious injury to the operator or bystanders.
 Use caution when positioning the product for use. Never place near
electrical outlets or switches.
 Verify that all connections are secure before operating the unit.
ASSEMBLY
INSTALLING THE EXPANSION KIT
The expansion kit allows you to increase the reach of your current
stainless steel misting kit.
 Install the tubes, connectors, T-fitting, and elbow as needed to expand
your current system as desired. Pull on tube to make sure it is fully
seated into connector, fitting, or elbow.
NOTE: Connectors, fitting, and elbow have slip lock connectors. If you
need to separate items once connected, press the inner ring on the
connector, fitting, or elbow with one hand while pulling out the tube
with the other as shown in figure 1.
 Install mounts (not provided) as needed to hold the installed expansion
kit securely in place. Use as many mounts as needed and space ap-
propriately so the expansion kit is held securely.
WARNING:
Always wear eye protection with side shields marked to comply with
ANSI Z87.1 when using a hammer to install mounts (not provided).
Failure to do so could result in objects being thrown into your eyes
resulting in possible serious injury.
WARNING:
Install mounts (not provided) in an area where no electrical wires, utility
cables, pipes, or other obstructions are located. Contact your local utility
company or a qualified electrician if you are unsure. Ensure mounts
and expansion tubes are securely installed to prevent falling object or
slippery surface hazard. Failure to follow these instructions can result
in electrical shock or other serious personal injury.
 Flush, pressurize, and operate the newly expanded system as described
in your misting kit's operating manual.
WARNING:
Ensure all components of expansion kit are properly assembled and
installed prior to operation and that the system does not leak water.
Improper connections and/or leaks can result in a slippery surface and
create a slip and fall hazard.
WARNING:
Keep water and mist discharge pointed away from all electrical devices
to reduce the risk of electrocution or electric shock.
SAVE THESE INSTRUCTIONS
This product has a one year limited warranty.
For warranty details go to www.arcticcove.com.
Fig. 1
A
B
C
D
A - Slip lock connector (
conector de bloqueo de
)
deslizamiento
B - Slip lock connector with nozzle (
de bloqueo de deslizamiento con boquilla
C - Slip lock T-fitting (
accesorio en T de bloqueo de
)
deslizamiento
D - Slip lock elbow ( codo de bloqueo de deslizamiento
E - 2 ft. Stainless steel tube [
]
de 610 mm (2 pies)
ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625
Phone 1-877-297-8911
www.arcticcove.com
E
conector
)
)
tubo de acero inoxidable
10-12-16 (REV:02)
990000843