Using The Camera; Power On/Power Off; Video Recording - Veho muvi TITAN Manual De Instrucciones

Using the camera

4

Power on/power off

To turn the camera on, slide the
power switch into the 'ON' position.
The status LED will appear green
whilst the camera is switched on.
To turn the camera off, slide
the power switch into the 'OFF'
position. The camera status LED
will disappear. If audio tones have
been enabled through camera
software, you will be notified.
VCC-005-HDPRO3 Manual 2.indd 8-9 VCC-005-HDPRO3 Manual 2.indd 8-9
ON

Video recording

First ensure the HD Pro 3 has been switched on, click
the record button to begin recording. The status LED
will change from green to flashing red whilst recording.
If audio tones have been enabled through camera
software, you will be notified.
To stop video recording, click the record button once
more. The status LED will change from flashing red
to green when the recording ends. If audio tones have
been enabled through camera software, you will be
notified.
EN
25/03/2021 12:15 25/03/2021 12:15