PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
Estimated Assembly Time: 15 minutes
No tools required for assembly.
ASSEMBLY INSTRUCTIONS
1. Place all the parts flat on the floor.
Twist clockwise and tighten the base
of each C7 light bulb (C) onto the
lampholders of the light string (A).
2. Each decorative cover (B) consists of two
halves. Insert the two plastic rods on one
half into the matching holes on the other
half.
Twist clockwise and tighten the base of
each decorative cover (B) onto each
socket of the light string (A).
3. Insert the flat end of each ground stake
(D) into the tube at the bottom of each
socket of the light string (A).
4. Push the sharp end of each ground
stake (D) into the ground.
Plug into a properly grounded
receptacle.
1
2
3
4
4
4