Carton Contents; Parts Identification - Craftsman 917.249910 Manual Del Usuario

KNOW YOUR GRASS CATCHER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS
CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the
assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass
Catcher and to prevent injury to yourself and others. Save this manual for future reference.
The op er a tion of any riding mower can result in foreign objects thrown into the eyes, which
can result in severe eye dam age. Al ways wear safety glass es or eye shields while op er at ing
your riding mower or per form ing any ad just ments or repairs. We rec om mend a wide vi sion
safe ty mask over spec ta cles or stan dard safety glass es.
COMPLETE BAGGER MUST BE IN PLACE BEFORE OPERATING MOWER
UNPACKING INSTRUCTIONS
• Remove all parts and packing materials
from carton.
• Check carton contents against list.
Be sure all parts are there.

PARTS IDENTIFICATION

COVER
GRASS
CATCHER
CONTAINERS
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the
riding mower, in the operator's position.
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO RIDING MOWER:
• Depress clutch/brake pedal fully and set parking brake.
• Place gearshift/motion control lever in "NEUTRAL" position.
• Place attachment clutch in "DISENGAGED" position.
• Turn ignition key "OFF" and remove key.
• Make sure the blade and all moving parts have completely stopped.
• Disconnect spark plug wire from plug and place where it cannot come in contact with plug.

CARTON CONTENTS:

(2) Containers
(1) Upper Chute
(1) Lower Chute
(1) Blade
SUPPORT
ASSEMBLY
FULL
BAG
INDICATOR
CHUTE
UPPER
LATCH
CHUTE
DEFLECTOR
GUARD
4
(1) Support Assembly
(1) Cover Assembly
(1) Counterweight
(1) Counterweight
hardware
BLADE
DRAWBAR
LOWER
CHUTE
COUNTERWEIGHT
HARDWARE
(1) Drawbar
(1) Deflector Guard
(1) Deflector Guard
Hardware
(1) #7 Drill Bit
LOWER
CHUTE
ATTACHING
STRAPS
COUNTERWEIGHT