Better Homes and Gardens Bryant BH17-084-099-54 Manual De Instrucciones página 5

If you need to remove the drawers with ball bearing slides from the unit, please follow the
steps below to prevent any damage to the slides or the drawers.
1. If you need to remove the drawer, please pull the drawer all the way out, then simultaneously
push the plastic release lever of the ball bearing slide up on one side and down on the other side,
and then pull the drawer completely out. See detail A.
2. To place the drawer back, simply push the ball bearing cart all the way to the end of the slides
(in both sides), and align the slide runners on the drawer with the slide tracks on the unit and
push it carefully inside until it stops. See detail B.
NOTE: If the drawer does not go in smoothly, please take it out and repeat the step.
DRAWER INSTALLATION
5