Página 1
Mid Century Bed Queen Grey Linen Weight Limit: 500 Lb / 227 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and Call our toll free number if you need assistance. agrees to remedy any such defect. This warranty covers one year from the date of Work in a spacious area and near where the unit will be used, preferably on a original purchase.
Página 4
Parts Replacement Parts, Visit www.dhpfurniture.com/eng/support-home This item is packed in 2 boxes! All parts listed on this page are in Box A. If Box B is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly. Headboard Tail Rail Side Rail...
Página 5
Parts Replacement Parts, Visit www.dhpfurniture.com/eng/support-home This item is packed in 2 boxes! All parts listed on this page are in Box B. If Box A is missing please contact your Retailer. Before you throw the package, please use the Footboard Side Panel Side Panel Center Rail...
Hardware Pack Hardware Pack #: T4162439WE-00 Washer 1/4" X 3/4" X 44 1/4" X 1 9/16" 1/4" X 2 9/16" Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
Página 7
Step 1 Open the compartment on the back side of the headboard A, take all parts out for assembly, close the compartment with the Velcro as illustrated.
Página 10
Step 4 4.1 Attach L x 2 and Z x 2 to C and D with Don't completely 4.2 Attach Z x 2 to H/C and H/D with tighten the bolts...
Página 11
Step 5 Attach N x 2 to B/C and B/D with...
Página 12
Step 6 Turn over the frame assembled from STEP 5. 6.1 Attach Z x 2 to H/C and H/D with 6.2 Attach Z x 2 to C and D with Don't completely tighten the bolts X 12...
Página 13
Step 7 Attach Z x 2 to A with Don't completely tighten the BOLT until STEP 9 is complete.
Página 15
Step 9 Attach F to A and H with Completely tighten the BOLTS from STEP 7 and STEP 9...
Página 16
Step 10 Attach Z x 2 to A with Attach L x 2 to A with Completely tighten all the bolts. Turn over the frame assembled from STEP 9.
Página 17
Step 11 11.1 Insert O1 into X ; 11.2 Press X into D , repeat the same procedure for the opposite side with O1 , X and C ; 11.3 Insert ends of both slats O1 into Y , then press Y into F as illustrated. 11.1 Repeat the same procedures going 11.3...
Move your new furniture carefully, with two people lifting and carrying the unit to its new location. Your DHP furniture can be disassembled and reassembled to move. Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement.
Página 19
Garant a Gracias por su compra DHP! DHP garantiza que este producto est libre de defectos de material y de fabricaci n, comprometi ndose a corregirlos en caso de ser hallados. Esta garant a es valida por Registra tu producto y participa para ganar! un a o a partir de la fecha de compra original.
Lea antes de comenzar a ensamblar Partes Llame a nuestro numero gratuito si necesita asistencia. Piezas de reemplazo, visite www.dhpfurniture.com/spa/support-home Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su piso y su producto.
Página 21
Paso 2 llevando el aparato a su nueva ubicaci n. x 4 con Z x 4. Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de Paso 3 mudanza. Algunas partes han sido pre-ensambladas en este producto. Se encuentran Una H con B usando ilustradas en esta p gina y disponibles para reemplazo.
Página 22
S'IL VOUS PLA T LIRE ET CONSERVER POUR R F RENCE ULT RIEURE. Garantie Merci d'avoir achet un produit de DHP ! DHP garantit que ce produit est exempt de tout vice de mat riaux et de fabrication et Enregistrez votre produit et s'engage rem dier un tel d faut.
Página 23
Avant de commencer l'assemblage Pi ces Si vous avez besoin d'aide, appelez notre service la client le sans frais. Pi ces de rechange, visitez www.dhpfurniture/fre/support-home Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le plancher et le produit.
Attacher Z x 4. Votre mobilier DHP peut tre d mont et reassembl pour faciliter les tape 3 d m nagements. Certaines pi ces ont t pr -assembl es pour ce produit. Ils sont illustr s sur...