Conference Call; Call Transfer; More Calling Features; Call History - JabloCom Essence Guía De Usuario

Saving from Contacts
Open phone book by pressing , select required contact, then go to contact options by
and select a H
pressing
ssigN otkey
which number to assign as Hotkey and confirm by
Flashing Hotkeys are empty. Hotkeys with steady light already have a stored number.
Hotkey LED flashes when the stored contact is calling you.
Hotkey LED shines when you are calling the stored contact.
Slow flashing of signalizes missed call from the stored contact.
To delete stored contact press

CONFERENCE CALL

Join up to six people into a conference call easier than ever before. Simply call the first
person and add more callers one after another.
Setting up a conference call
Call the first participant as usual and ask him to wait for a moment. Press
a ... and select another caller. Confirm by
dd caller
and joined. Repeat to add more callers.
Private talking during the conference call
You can privately talk to a single caller during a conference call. Press
P # and choose from a list of all conference callers. To end the private call and get
rivate
back to conference, press and select Join calls.
You can release one or more callers from the conference call in a similar manner. During
, select r
a conference call press
elease
callers. You can also ask the other party to simply hang up their receiver.

CALL TRANSFER

The call transfer function allows you to forward the active call to another phone number.
During an incoming call, press , select t
call to. Confirm by and wait for a moment. You can always press
c to interrupt the transfer and get back to the first caller.
aNcel
Some of the advanced call functions will not work properly
unless they are supported by your GSM operator.
. If your contact has more numbers you will select
.
for 5s and confirm by pressing
, select
and wait for calls to be established
and select
# and choose from a list of all conference
... and choose contact to transfer the
raNsfer
and select
- 8 -

4. MORE CALLING FEATURES

CALL HISTORY

To see All calls you can press . To see Missed calls press
If is flashing you have a missed call. If
call from contact stored under the Hotkey.

CALL WAITING

The call waiting function indicates an incoming call even when another call is in progress.
To use the call waiting function, please check that you have activated
it in the c s .
alls ettiNgs

CALL DIVERT

In case you are leaving for a longer period of time, divert incoming calls to a colleague or
your mobile phone. Press > s
ettiNgs
All calls Diverts all incoming calls.
If busy When someone calls you and you speak to someone else.
If no answer When someone calls you and you do not answer the call for 5 to 30 seconds.
You will set the time when you activate this divert.
If unreachable When someone calls you and the phone is OFF or it has no signal.
Cancel all diverts
Cancels all call diverts.
again.
is flashing too you have missed
> c > c to set up.
alls all divert
- 9 -