Abus wAppLoxx 505272 Manual De Instrucciones página 4

wAppLoxx Control Finder
Accessing the wAppLoxx Control for the first time
• The wAppLoxx Control is accessed for the first time using
the wAppLoxx Control finder.
• You can find the program by clicking on the following
link: abus.com. Install the program on your PC and
then run it as described.
• When you install it for the first time, the first thing you
need to do is select your desired language. Install the
finder after making your selection.
• The installed finder searches for all the wAppLoxx Controls
connected to your local network.
• If a DHCP server is available on your network, the IP
address is assigned automatically for both the PC/laptop
and the wAppLoxx Control.
• If no DHCP server is available, the wAppLoxx Control
automatically sets the following IP address: 192.168.0.50.
• Your PC system must be located on the same IP subnet
in order to establish communication with the wAppLoxx
Control.
4
English