Assembly - HAMPTON BAY QTP22a-R4-AC-2 Guía De Uso Y Cuidado

Assembly

1
Removing the Removing Removing Removing
Locate two locking tabs on the top housing (A). On
□
either side, push the plastic wall with appropriate
force to release the lens (B) from the locking tabs.
On the underside of the top housing (A), pull off the
□
isolation strip.
Replace the top housing (A) back onto the lens (B).
□
the isolation the the isolation strip isolation isolation strip strip strip
A
B
A
A
B
2
Assembling the Assembling Assembling Assembling
Use the screws (E) to secure the base (C) or
□
(D) onto a 6 in. x 6 in. or 4 in. x 4 in. wood
post.
Attach the lantern assembly onto the base (C)
□
or (D) by inserting the two locking tabs on the
lens (B) into the two slots on the base (C) or
(D).
Twist the lantern assembly clockwise to lock
□
into place.
C
E
B
4
the lantern the the lantern lantern lantern
C