Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
other rights which vary from state to state
or province to province. Should you have
any questions, contact the manager of
your nearest BlAcK+DEcKER Service
Center. This product is not intended for
commercial use.
fRee WARNING lABel
RePlAceMeNT: If your warning labels
become illegible or are missing, call 1-800-
544-6986 for a free replacement.
Problem
• Unit will not start.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BlAcK+DEcKER help line at
1-800-544-6986.
TRouBleShooTING
Possible cause
• cord not plugged in.
• circuit fuse is blown.
• circuit breaker is tripped.
• cord or switch is damaged.
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
lATIN AMeRIcA: This warranty does not
apply to products sold in Latin America. For
products sold in Latin America, check country
specific warranty information contained in
the packaging, call the local company or
see the website for warranty information.the
packaging, call the local company or see the
website for warranty information.
Possible Solution
• Plug tool into a working outlet.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a BlAcK+DEcKER
service center or authorized
servicer.)
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a
BlAcK+DEcKER service center
or authorized servicer.)
• Have cord or switch replaced
at a BlAcK+DEcKER Service
Center or Authorized Servicer
12
12
Publicidad
Tabla de contenido
