Publicidad
Idiomas disponibles
Idiomas disponibles
BOLT KITS
Qty.
Description
39
1/4-20 x 5/8" Hex Hd. Bolt
36
1/4-20 Nylon Lock Nut
4
1/4-14 x 3/4" Self-Drilling Screw
10
M8 Hex Hd. Bolt
18
1/4" Flat Washer
5
Mounting Spacer
1
1/4-20 Blind Fastener
1
Blind Fastener Installation Tool
6
1/8" x 1" 4" Foam Pads
1
1/4-20 x 2-1/4" Hex Hd. Black Bolt
STEP 1: Assemble the Door Pocket to the driver's
side of the Center Panel using four (4) 1/4-20 x
5/8" Hex Head Bolts and 1/4-20 Nylon Lock Nuts.
NOTE: The hinged door will remain open or closed
by connecting the small squares of hook and loop
material on the door to the small squares on the
center panel in either position.
ASSEMBLY INSTRUCTIONS
STEP 2: Attach Driver Side Panel to Center Panel
with both panels flush at the bottom using six (6)
1/4-20 x 5/8" Hex Head Bolts and 1/4-20 Nylon
Lock Nuts.
2
TOOLS REQUIRED
•
1" Hole Saw or sharp knife (if vehicle has
floor mat installed)
•
3/8" Ratchet Drive
•
Sockets: 5/16", 7/16"
•
Level
•
Carpenter's Square
•
Open End Wrenches: 7/16"
Publicidad
