ARDES AR4O160 Folleto De Instrucciones página 6

Do not use it for persons who are helpless, insensitive to heat, or for small children.
Prolonged application at high temperature may burn the skin.
Do not place the control unit near sources of heat. Do not cover the control unit or
place it on top of the appliance while it is in use.
This appliance is not meant for hospital use.
READ THIS DO NOT USE IT FOLDED UP DO NOT USE
DO NOT USE
INSTRUCTIONS DO NOT USE IT WHEN IT IS PINS
0-3 YEARS
CAREFULLY. WRINKLED
This product has been manufactured in conformity to current 2006/95/EC and
2004/108/EC
Technical data indicated on the appliance.
INSTRUcTIONS fOR USE
Plug the switch cable into the wall socket.
Please set at "H" preheating 30-60 minutes before using.
If you will go to sleep or use it for a long time, please set at "L"
tap position or "1" tap position.
The starting up state is the standby state. The digital display of
temperature is 0 and the timing display is 0.
Press TEMP and display temperature at 7 tap position and the
timing state is 9 hours.
Press TEMP and display the tap position circulates among
L1.2.3.4.5.6.7.
Press TIME and the timing state circulates from 1-9 hours
Press High key and the temperature tap position is preheating
which is displayed as H. This tap position will automatically
change to L tap position 1 hour later.
If the temperature is displayed as :
P= please check whether the coupler of the electric blanket has been connected
firmly or not and restart it. If the fault cannot be removed, it means the internal
connection of the electric blanket has problems and it needs to ask help from after-
sales service.
E= it means the electric blanket has internal short circuit and has been broken.
When the blanket is not in use, please switch the controller to the off position;
remove the plug from the power socket. If the blanket is not to be used for a long
period of time, store the blanket in a cool and dry place.
6