Special Instructions - Brentwood Select KT-40BS Instrucciones De Operación Y Seguridad

• Do not allow cord to touch hot surfaces.
• Do not operate the product if it has a damaged or cut Power Cord or plug, if wires are
exposed, if it malfunctions, if it is dropped or damaged, or if the Motor Housing is dropped
in or exposed to water.
• This product has no user-serviceable parts.
• Do not attempt to examine or repair this product yourself. Only qualified service
personnel should perform any servicing; take the product to the appliance repair shop of
your choice for inspection and repair.
• Do not put any stress on the power cord where it connects to the product, as the power
cord could fray and break.

SPECIAL INSTRUCTIONS:

A short power supply cord is provided to reduce the risk of becoming entangled
in or tripping over a longer cord. An extension cord is not recommended for
use with this product, but if one must be used:
 The marked electrical rating must be at least as great as that of the product
 If the product is of a 3-prong grounding type, the extension cord must be a grounding-
type 3-wire cord.
 Arrange the extension cord so that it will not drape over the countertop or tabletop
where it can be tripped over or pulled.
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding as there may be
accessory parts contained within the packaging material.
WARNING: Do not place any part of the product in a dishwasher.
Before your first official use we recommend running your Kettle.
• Fill the Kettle to the maximum level mark on the appliance with fresh tap water and bring
to boil. Empty the water from the Kettle. Once cooled rinse Kettle with water.
• Repeat process at least 2 times to ensure your Kettle is clean.
Attention: First use may cause a slight odor or small smoking upon heating, it is normal. This
is a result of the heating element chemical reaction. It quickly goes away.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE
3