Style Stars 8812GYMV Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
4. Fasten the other side panel (A) with screws (BB)
and wood screws (CC), as shown.
Hardware Used
BB
Screw
CC
Wood Screw
DD
Allen Wrench
5. Hold the unit level at the desired position on
the wall. Mark the mounting points on wall
through the holes in the back tubes of the unit.
NOTE: Make sure the unit is level.
NOTE: Wall anchors (GG) should be oriented
with the flat side horizontal.
Hammer the wall anchors (GG) into wall, unless
mounting screws (EE) will go directly into a stud.
Insert the mounting screws (EE) through the
holes in the back tubes and the spacers (FF)
of the unit.
Place unit against the wall, lining up the mounting
screws (EE) to the holes in wall and complete
the mounting by tightening mounting screws (EE)
into the studs or wall anchors (GG), as shown.
Hardware Used
Mounting Screw
EE
FF
Spacer
GG
Wall Anchor
IS08812-I
4
x 3
x 4
x 1
15
x 4
x 4
x 4
5
CC
A
CC
BB
wall mounting hole
GG
FF
EE
BB