Hughes & Kettner BassForce XXL Manual De Instrucciones página 5

option, the amp is equipped with an external speaker jack
that deactivates the internal speaker, letting you connect a
set of speakers with a total load no lower than 4 ohms.
LINE OUT: Balanced output of the BassForce preamp. Connect
it to a mixer or power amp. This output is
post-EQ section—in other words, the tone knobs
influence this signal; the MASTER volume knob,
however, does not.
FX RETURN: Connect the output of your effects device
to this jack.
FX SEND: Connect this output to the input of your
effects device.
FOOTSWITCH: Input jack for a standard footswitch. Note: The
front panel switch is deactivated when you plug a footswitch
into this jack.
2.0 STANDARD SETUP / CABLE CONNECTIONS
3.0 OPERATING THE BASSFORCE XXL
3.1 THE EQ MAT R I X
The BassForce series is equipped with the EQ MATRIX,
a feature that lets you activate four different settings of
a 31-band graphic equalizer at the flick of a switch.
Renowned professional players helped define these
sounds and we painstakingly tuned them to give
you instant tone at your fingertips.
BASSFORCE XXL SOUND I:
Warm bottom end, easy on the mids, shimmering highs,
suitable for all playing styles.
BASSFORCE XXL SOUND II:
Highly defined and precise, lets you and your audience hear
every nuance of your slap technique.
BASSFORCE XXL SOUND III:
Fretless bass tone, also ideal for ballads, particularly when the
preamp is ever so slightly saturated.
BASSFORCE XXL SOUND IV:
Heavy stuff for serious headbanging; regardless whether you
use a pick or your fingers, this is a great sound for
rock bass.