B52 GEMINIS X Manual Del Usuario página 5

GEMINIS X OPERATIONAL MANUAL
BUTTON
BUTTON
BUTTON
*
BUTTON
CODE HOPPING TRANSMITTER：
If battery dis-connection or change battery might cause to dynamic code change.
User must press any button 2 times in 5 seconds to let this system re-works.
@ Button + press within 5 seconds during arming , parking lights flash 3 times, shock
& option sensor temporary no function until disarm & arm again (become normal again)
W / JUMPER
OPEN
P1
W / JUMPER
OPEN
P2
W / JUMPER
OPEN
P3
W / JUMPER With ignition door lock feature
P4
OPEN Cancel ignition door lock feature
W / JUMPER Normal central lock
OPEN Air compressor door lock ( BENZ )
P5
W / JUMPER Normal unlock
P6 OPEN Two pulse unlock ( NEW G..M. & V.W.)
＊ Above 3 jumpers changing status must unplug then plug again.
: A. Arm
B. When ignition on -------------- door lock
: A. Disarm
B. When arming ------------------ keep press 2" to car finder
C. When ignition ----------------- door unlock
D. When arming within 5" ----- keep press 2" to option sensor bypass
: A. Keep press 2"------------------ Panic
B. Chirp defeat arm
C. When arming within 5" ----- keep press 2" to all (shock & option) sensor bypass
D. When ignition on within 5"- keep press 2" to valet mode
(repeat normal procedure return to normal function)
st
: A. Remote 1 . aux. Output
B. When ignition on------------- Keep bypass 2" to anti-car jacking
With last door arming feature
Cancel last door arming feature
Door lock during last door arming
Without door lock during last door arming
For normal car, door sensor alert when arm
For dome light delay car, door sensor delay alert until dome light off
P1 P2 P3 P4 P5 P6 P7 P8
*
*
*
FUNCTION PROGRAMMABLE DETAIL